Epson TM-L90 series Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson TM-L90 series. Epson TM-L90 series 21 pages. Attaching cover on the power switch
Également pour Epson TM-L90 series : Brochure (1 pages), Brochure (2 pages), Manuel du produit (27 pages), Spécifications (2 pages), Spécifications (8 pages), Manuel d'information (5 pages), Spécifications (4 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (21 pages), Manuel de fabrication (22 pages), Commencer ici (2 pages), Commencer ici (2 pages), Manuel (13 pages), Manuel d'instructions (12 pages), Manuel de l'utilisateur (36 pages), Manuel de développement (34 pages), Manuel (2 pages)

Imprimer la page
Epson TM-L90 series Manuel de l'utilisateur

Installing the Printer Vertically or Horizontally

You can install the printer vertically (with the paper exit at the front) by hanging it on a
wall, using the optional WH-10 hanging bracket set or horizontally on a flat surface (with
the paper exit on top).
WARNING:
When hanging the printer on the wall with the hanging bracket set, be sure
to attach a connector cover to the printer.

Installing the printer horizontally

1.
Attach the control panel label.
2.
Loosen the screw with a coin or similar tool and turn it at least 3 or 4 times.
3.
Turn the lever to move the sensor in the direction of the arrow in illustration until the sensor
comes out from another hole near the bottom of the printer.
Lever
Screw
4.
Tighten the screw and make sure the lever moves smoothly.
8 TM-L90 User's Manual
Control panel label
Near-end sensor
Hole