Epson TM-L90 series Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 21 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Installing the Printer Vertically or Horizontally

You can install the printer vertically (with the paper exit at the front) by hanging it on a

wall, using the optional WH-10 hanging bracket set or horizontally on a flat surface (with

the paper exit on top).

WARNING:

When hanging the printer on the wall with the hanging bracket set, be sure

to attach a connector cover to the printer.

Attach the control panel label.

Loosen the screw with a coin or similar tool and turn it at least 3 or 4 times.

Turn the lever to move the sensor in the direction of the arrow in illustration until the sensor

comes out from another hole near the bottom of the printer.

Lever

Screw

Tighten the screw and make sure the lever moves smoothly.

8 TM-L90 User's Manual

Control panel label

Near-end sensor

Hole