Epson TM-L90 series User Manual - Page 8

Browse online or download pdf User Manual for Printer Accessories Epson TM-L90 series. Epson TM-L90 series 21 pages. Attaching cover on the power switch
Also for Epson TM-L90 series: Brochure (1 pages), Brochure (2 pages), Product Manual (27 pages), Specifications (2 pages), Specifications (8 pages), Information Manual (5 pages), Specifications (4 pages), User Manual (40 pages), User Manual (17 pages), User Manual (21 pages), Manufacturing Manual (22 pages), Start Here (2 pages), Start Here (2 pages), Manual (13 pages), Instructions Manual (12 pages), User Manual (36 pages), Development Manual (34 pages), Manual (2 pages)

Print Page
Epson TM-L90 series User Manual

Installing the Printer Vertically or Horizontally

You can install the printer vertically (with the paper exit at the front) by hanging it on a
wall, using the optional WH-10 hanging bracket set or horizontally on a flat surface (with
the paper exit on top).
WARNING:
When hanging the printer on the wall with the hanging bracket set, be sure
to attach a connector cover to the printer.

Installing the printer horizontally

1.
Attach the control panel label.
2.
Loosen the screw with a coin or similar tool and turn it at least 3 or 4 times.
3.
Turn the lever to move the sensor in the direction of the arrow in illustration until the sensor
comes out from another hole near the bottom of the printer.
Lever
Screw
4.
Tighten the screw and make sure the lever moves smoothly.
8 TM-L90 User's Manual
Control panel label
Near-end sensor
Hole