Epson StylusRIP Professional (Stylus Photo 2200 Commencer ici Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Commencer ici Manuel pour {nom_de_la_catégorie} Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 6 pages. Product support bulletin(s)
Également pour Epson StylusRIP Professional (Stylus Photo 2200 : Spécifications (2 pages), Bulletin d'information sur les produits (10 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (1 pages), Bulletin d'information sur les produits (4 pages)

Remove all the blue tape and packing materials inside and around the printer.

Put On the

Paper Support

Insert the paper support into its slots behind

the sheet feeder.

(To install the roll paper holders, and

automatic roll paper cutter and basket,

see your Printer Basics book.)

Connect the Printer

Printer connection cables are not included with your printer. You need only one of the

following cables:

•

USB cable, or

•

Parallel cable (PC only), or

•

IEEE-1394 or FireWire™ cable.

USB Cable Users

Shut down your computer. In Windows

or Turn Off option.

Leave your computer turned off until section 7.

Plug the square end of the cable into your printer's USB port until it stops.

Plug the flat end of the cable into your computer's USB port until it stops.

(You can use any open USB port.)

Now plug in and turn on your printer, as described in section 4.

Square end

, click Start and select your Shut Down

Flat end

Paper support slots