Epson StylusRIP Professional (Stylus Photo 2200 여기에서 시작하기 매뉴얼 - 페이지 2
{카테고리_이름} Epson StylusRIP Professional (Stylus Photo 2200에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson StylusRIP Professional (Stylus Photo 2200 6 페이지. Product support bulletin(s)
Epson StylusRIP Professional (Stylus Photo 2200에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 지원 게시판 (10 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 제품 지원 게시판 (4 페이지)
페이지 인쇄
2
Remove all the blue tape and packing materials inside and around the printer.
2
2
Put On the
Put On the
Paper Support
Paper Support
Insert the paper support into its slots behind
the sheet feeder.
(To install the roll paper holders, and
automatic roll paper cutter and basket,
see your Printer Basics book.)
3
3
Connect the Printer
Connect the Printer
Printer connection cables are not included with your printer. You need only one of the
following cables:
•
USB cable, or
•
Parallel cable (PC only), or
•
IEEE-1394 or FireWire™ cable.
USB Cable Users
1
Shut down your computer. In Windows
or Turn Off option.
Leave your computer turned off until section 7.
2
Plug the square end of the cable into your printer's USB port until it stops.
3
Plug the flat end of the cable into your computer's USB port until it stops.
(You can use any open USB port.)
4
Now plug in and turn on your printer, as described in section 4.
Square end
®
, click Start and select your Shut Down
Flat end
Paper support slots