Epson StylusRIP Professional (Stylus Photo 2200 Buradan Başlayın Kılavuzu - Sayfa 2

Yazılım Epson StylusRIP Professional (Stylus Photo 2200 için çevrimiçi göz atın veya pdf Buradan Başlayın Kılavuzu indirin. Epson StylusRIP Professional (Stylus Photo 2200 6 sayfaları. Product support bulletin(s)
Ayrıca Epson StylusRIP Professional (Stylus Photo 2200 için: Teknik Özellikler (2 sayfalar), Ürün Destek Bülteni (10 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Ürün Destek Bülteni (4 sayfalar)

Sayfayı Yazdır
Epson StylusRIP Professional (Stylus Photo 2200 Buradan Başlayın Kılavuzu
2
Remove all the blue tape and packing materials inside and around the printer.
2
2
Put On the
Put On the
Paper Support
Paper Support
Insert the paper support into its slots behind
the sheet feeder.
(To install the roll paper holders, and
automatic roll paper cutter and basket,
see your Printer Basics book.)
3
3

Connect the Printer

Connect the Printer
Printer connection cables are not included with your printer. You need only one of the
following cables:
•
USB cable, or
•
Parallel cable (PC only), or
•
IEEE-1394 or FireWire™ cable.
USB Cable Users
1
Shut down your computer. In Windows
or Turn Off option.
Leave your computer turned off until section 7.
2
Plug the square end of the cable into your printer's USB port until it stops.
3
Plug the flat end of the cable into your computer's USB port until it stops.
(You can use any open USB port.)
4
Now plug in and turn on your printer, as described in section 4.
Square end
®
, click Start and select your Shut Down
Flat end
Paper support slots