Epson StylusRIP Professional (Stylus Photo 2200 여기에서 시작하기 매뉴얼 - 페이지 3
{카테고리_이름} Epson StylusRIP Professional (Stylus Photo 2200에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson StylusRIP Professional (Stylus Photo 2200 6 페이지. Product support bulletin(s)
Epson StylusRIP Professional (Stylus Photo 2200에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 지원 게시판 (10 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 제품 지원 게시판 (4 페이지)
페이지 인쇄
Parallel Cable Users (PC only)
1
Shut down your computer. Click Start and select your Shut Down or Turn Off option.
Leave your computer turned off until section 7.
2
Plug the end of the cable with the slotted connector into your printer's parallel port, then
secure it with the wire clips.
3
Plug the end of the cable with the screws on the side into your computer's parallel port
and secure it.
4
Now plug in and turn on your printer, as described in section 4.
IEEE-1394 or FireWire Cable Users
1
Shut down your computer. In Windows, click Start and select your Shut Down
or Turn Off option.
Leave your computer turned off until section 7.
2
Plug one end of the cable into the printer's IEEE1394 port.
3
Plug the other end of the cable into your computer's IEEE-1394 port.
4
Now plug in and turn on your printer, as described in section 4.
4
4
Turn On the Printer
Turn On the Printer
1
Connect the power cord that came with your printer to the printer's
AC inlet.
2
Plug the other end of the power cord into a grounded electrical outlet.
3
Press and release the
CAUTION: Never use an external switch, such as a wall switch or power strip
switch, to turn the printer on or off.
Slotted end
power button to turn it on.
Power button
End with Screws
AC inlet