Epson StylusRIP Professional (Stylus Photo 2200 Mulai dari Sini Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Perangkat lunak Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 6 halaman. Product support bulletin(s)
Juga untuk Epson StylusRIP Professional (Stylus Photo 2200: Spesifikasi (2 halaman), Buletin Dukungan Produk (10 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Buletin Dukungan Produk (4 halaman)

Halaman Cetak

Epson StylusRIP Professional (Stylus Photo 2200 Mulai dari Sini Manual

Parallel Cable Users (PC only)

Shut down your computer. Click Start and select your Shut Down or Turn Off option.

Leave your computer turned off until section 7.

Plug the end of the cable with the slotted connector into your printer's parallel port, then

secure it with the wire clips.

Plug the end of the cable with the screws on the side into your computer's parallel port

and secure it.

Now plug in and turn on your printer, as described in section 4.

IEEE-1394 or FireWire Cable Users

Shut down your computer. In Windows, click Start and select your Shut Down

or Turn Off option.

Leave your computer turned off until section 7.

Plug one end of the cable into the printer's IEEE1394 port.

Plug the other end of the cable into your computer's IEEE-1394 port.

Now plug in and turn on your printer, as described in section 4.

Turn On the Printer

Connect the power cord that came with your printer to the printer's

AC inlet.

Plug the other end of the power cord into a grounded electrical outlet.

Press and release the

CAUTION: Never use an external switch, such as a wall switch or power strip

switch, to turn the printer on or off.

Slotted end

power button to turn it on.

Power button

End with Screws

AC inlet