Epson StylusRIP Professional (Stylus Photo 2200 Посібник "Почніть тут - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник "Почніть тут для Програмне забезпечення Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 6 сторінок. Product support bulletin(s)
Також для Epson StylusRIP Professional (Stylus Photo 2200: Технічні характеристики (2 сторінок), Бюлетень підтримки продукту (10 сторінок), Бюлетень підтримки продукту (6 сторінок), Бюлетень підтримки продукту (1 сторінок), Бюлетень підтримки продукту (4 сторінок)

Друкувати сторінку
Epson StylusRIP Professional (Stylus Photo 2200 Посібник
Parallel Cable Users (PC only)
1
Shut down your computer. Click Start and select your Shut Down or Turn Off option.
Leave your computer turned off until section 7.
2
Plug the end of the cable with the slotted connector into your printer's parallel port, then
secure it with the wire clips.
3
Plug the end of the cable with the screws on the side into your computer's parallel port
and secure it.
4
Now plug in and turn on your printer, as described in section 4.
IEEE-1394 or FireWire Cable Users
1
Shut down your computer. In Windows, click Start and select your Shut Down
or Turn Off option.
Leave your computer turned off until section 7.
2
Plug one end of the cable into the printer's IEEE1394 port.
3
Plug the other end of the cable into your computer's IEEE-1394 port.
4
Now plug in and turn on your printer, as described in section 4.
4
4

Turn On the Printer

Turn On the Printer
1
Connect the power cord that came with your printer to the printer's
AC inlet.
2
Plug the other end of the power cord into a grounded electrical outlet.
3
Press and release the
CAUTION: Never use an external switch, such as a wall switch or power strip
switch, to turn the printer on or off.
Slotted end
power button to turn it on.
Power button
End with Screws
AC inlet