CRRC MS-BT20 Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CRRC MS-BT20. CRRC MS-BT20 17 pages. For 1/2” meishan bobtail

Imprimer la page

3.4 Sequence of Installation

a. Thread the collar until the pintail is fully exposed.

b. Insert the tool, and make sure the jaws catch onto the proper area of the pintail, as shown

above.

c. Press and hold the trigger to swage the collar.

d. Release the trigger when the collar is fully swaged.

3.5 Typical incorrect operation

Standard correct operation is required to avoid any accidents from occurring.

Please follow the figure below, otherwise, the incorrect operation shown below may

lead to failure of installation, damage to the tool's moving parts, and even personal

injury.

Incorrect operation (Jaws have caught

onto the incorrect area)

Correct operation