Dini Argeo ALP Manuel opératoire - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel opératoire pour {nom_de_la_catégorie} Dini Argeo ALP. Dini Argeo ALP 19 pages.

4.6 Print Menu [.Print.]

Output Stable [Out.Stab] – Data will only be sent when the Stable indicator is on. This setting works with

manual button pressing or continuous and interval Auto Print. (SEt On, SEt OFF)

Auto Print [A.Print] – Data will be continuously sent when [Continu] is set. Interval [Inter] sends data

every 1 to 3600 seconds. When Stable [Stable] will send data when the balance detects a new stable

reading. This can be a weight value only [LOad] or it can also include a stable zero [L+zero]. [OFF] disables

automatic printing.

Content [CONteNt] – The content in the data transmission can be modified. Each of the following settings

can be set on or off. Number Only [numMber] will only send the numeric result. Balance ID [Bal. ID] will

add the Balance serial number for traceability purposes. Reference [refer] will add reference

information relevant to the current mode. GLP [GLP] will send additional items to allow proper

documentation of laboratory results.

Line Format [LinE Fo] – Single line format [sinGle] will put all the data in one line separating each

output with a comma (,). Multi line format [mMulti] will put each data output on a new line. Multi +4

[mM-4LF] will add 4 line spaces between each output.

^^^^^^^^^^^^^^^^^^^^^^^^^^

User ID: ............................

Bal ID: 123456789

Proj ID: ...........................

Time: ......:.......:.......

Date: ...../ ..... / .....

120.01 g

^^^^^^^^^^^^^^^^^^^^^^^^^^

Multi Line Format with 4

line feeds

Line Feed-2

Line Feed-3

Line Feed-4

GLP (ON)

Balance ID (ON)

GLP (ON)

Result