Yamaha Electone F-25 Manuel d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Yamaha Electone F-25. Yamaha Electone F-25 43 pages. Speaker systems and subwoofer
Également pour Yamaha Electone F-25 : Manuel du propriétaire (13 pages), Manuel de l'utilisateur (25 pages), Manuel (25 pages), Manuel d'entretien (5 pages), Manuel du propriétaire (14 pages)
Imprimer la page
GEN
INFO
Special service tool
Use the recommended special service tools
to work safely, and to protect parts from dam-
age.
Tightening torque
Follow the tightening torque specifications
provided throughout the manual. When tight-
ening nuts, bolts, and screws, tighten the
large sizes first, and tighten fasteners starting
in the center and moving outward.
Non-reusable part
Always use new gaskets, seals, O-rings, cot-
ter pins, and so on, when installing or assem-
bling parts.
0-3
General information
Disassembly and assembly
• Use compressed air to remove dust and dirt
during disassembly.
• Apply engine oil to the contact surfaces of
moving parts before assembly.
• Install bearings so that the bearing identifi-
cation mark is facing in the direction indi-
cated in the installation procedure. In
addition, make sure to lubricate the bear-
ings liberally.
• Apply a thin coat of water resistant grease
to the lip and periphery of an oil seal before
installation.
• Check that moving parts operate normally
after assembly.