Yamaha Electone F-25 Servicehandleiding - Pagina 6

Blader online of download pdf Servicehandleiding voor {categorie_naam} Yamaha Electone F-25. Yamaha Electone F-25 43 pagina's. Speaker systems and subwoofer
Ook voor Yamaha Electone F-25: Gebruikershandleiding (13 pagina's), Gebruikershandleiding (25 pagina's), Handmatig (25 pagina's), Servicehandleiding (5 pagina's), Gebruikershandleiding (14 pagina's)

GEN

INFO

Special service tool

Use the recommended special service tools

to work safely, and to protect parts from dam-

age.

Follow the tightening torque specifications

provided throughout the manual. When tight-

ening nuts, bolts, and screws, tighten the

large sizes first, and tighten fasteners starting

in the center and moving outward.

Always use new gaskets, seals, O-rings, cot-

ter pins, and so on, when installing or assem-

bling parts.

0-3

General information

• Use compressed air to remove dust and dirt

during disassembly.

• Apply engine oil to the contact surfaces of

moving parts before assembly.

• Install bearings so that the bearing identifi-

cation mark is facing in the direction indi-

cated in the installation procedure. In

addition, make sure to lubricate the bear-

ings liberally.

• Apply a thin coat of water resistant grease

to the lip and periphery of an oil seal before

installation.

• Check that moving parts operate normally

after assembly.