Yamaha Electone F-25 서비스 매뉴얼 - 페이지 6
{카테고리_이름} Yamaha Electone F-25에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Electone F-25 43 페이지. Speaker systems and subwoofer
Yamaha Electone F-25에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지), 사용자 설명서 (25 페이지), 매뉴얼 (25 페이지), 서비스 매뉴얼 (5 페이지), 소유자 매뉴얼 (14 페이지)
페이지 인쇄
GEN
INFO
Special service tool
Use the recommended special service tools
to work safely, and to protect parts from dam-
age.
Tightening torque
Follow the tightening torque specifications
provided throughout the manual. When tight-
ening nuts, bolts, and screws, tighten the
large sizes first, and tighten fasteners starting
in the center and moving outward.
Non-reusable part
Always use new gaskets, seals, O-rings, cot-
ter pins, and so on, when installing or assem-
bling parts.
0-3
General information
Disassembly and assembly
• Use compressed air to remove dust and dirt
during disassembly.
• Apply engine oil to the contact surfaces of
moving parts before assembly.
• Install bearings so that the bearing identifi-
cation mark is facing in the direction indi-
cated in the installation procedure. In
addition, make sure to lubricate the bear-
ings liberally.
• Apply a thin coat of water resistant grease
to the lip and periphery of an oil seal before
installation.
• Check that moving parts operate normally
after assembly.