Clarke ZX-R Pro Series Manuel d'utilisation et d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke ZX-R Pro Series. Clarke ZX-R Pro Series 17 pages. 20v cordless multi function tool
Également pour Clarke ZX-R Pro Series : Manuel d'utilisation, d'entretien et d'instruction (8 pages), Manuel d'utilisation et d'entretien (9 pages), Manuel d'utilisation et d'entretien (17 pages), Manuel d'utilisation et d'entretien (13 pages), Manuel d'utilisation et d'entretien (17 pages)

LASER GUIDE

The laser guide helps keep the blade aligned with the cutting line.

1. Press the Laser on/off button to

turn the laser on.

• Do not point the laser beam at

people.

• Keep the laser beam below

eye level.

• Only turn on laser beam when

the tool is on the work piece.

2. Press the Laser on/off button

again to turn the laser off.

• Wait until the blade is running at full speed before attempting to cut

the workpiece.

• Do not put unnecessary pressure on the blade and avoid applying

lateral pressure.

• Take extra care when cutting curves - move the blade slowly to

avoid stress on the blade.

WOOD

• Check that any previously used timber being sawn does not contain

any nails or other metal objects which would damage the blade.

METAL

• Choose a suitable blade for cutting metal

• Lubricate the material and blade with cutting oil to prevent

overheating.

HOLE CUTTING

• When starting a cut from the center of a work piece, drill a 12mm

diameter hole to ensure that there is clearance for the blade

• Remember that the blade should emerge from the workpiece at

every point of the cut.

• When cutting tight curves, reduce the forward speed of the saw.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]