Clarke ZX-R Pro Series Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 10

Elektrikli Alet Clarke ZX-R Pro Series için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke ZX-R Pro Series 17 sayfaları. 20v cordless multi function tool
Ayrıca Clarke ZX-R Pro Series için: Kullanım, Bakım ve Talimat Kılavuzu (8 sayfalar), Kullanım ve Bakım Talimatları Kılavuzu (9 sayfalar), Kullanım ve Bakım Talimatları Kılavuzu (17 sayfalar), Kullanım ve Bakım Talimatları Kılavuzu (13 sayfalar), Kullanım ve Bakım Talimatları Kılavuzu (17 sayfalar)

LASER GUIDE

The laser guide helps keep the blade aligned with the cutting line.

1. Press the Laser on/off button to

turn the laser on.

• Do not point the laser beam at

people.

• Keep the laser beam below

eye level.

• Only turn on laser beam when

the tool is on the work piece.

2. Press the Laser on/off button

again to turn the laser off.

• Wait until the blade is running at full speed before attempting to cut

the workpiece.

• Do not put unnecessary pressure on the blade and avoid applying

lateral pressure.

• Take extra care when cutting curves - move the blade slowly to

avoid stress on the blade.

WOOD

• Check that any previously used timber being sawn does not contain

any nails or other metal objects which would damage the blade.

METAL

• Choose a suitable blade for cutting metal

• Lubricate the material and blade with cutting oil to prevent

overheating.

HOLE CUTTING

• When starting a cut from the center of a work piece, drill a 12mm

diameter hole to ensure that there is clearance for the blade

• Remember that the blade should emerge from the workpiece at

every point of the cut.

• When cutting tight curves, reduce the forward speed of the saw.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]