Clarke ZX-R Pro Series Manual de Instruções de Operação e Manutenção - Página 10

Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramenta eléctrica Clarke ZX-R Pro Series. Clarke ZX-R Pro Series 17 páginas. 20v cordless multi function tool
Também para Clarke ZX-R Pro Series: Manual de operação, manutenção e instruções (8 páginas), Manual de Instruções de Operação e Manutenção (9 páginas), Manual de Instruções de Operação e Manutenção (17 páginas), Manual de Instruções de Operação e Manutenção (13 páginas), Manual de Instruções de Operação e Manutenção (17 páginas)

LASER GUIDE

The laser guide helps keep the blade aligned with the cutting line.

1. Press the Laser on/off button to

turn the laser on.

• Do not point the laser beam at

people.

• Keep the laser beam below

eye level.

• Only turn on laser beam when

the tool is on the work piece.

2. Press the Laser on/off button

again to turn the laser off.

• Wait until the blade is running at full speed before attempting to cut

the workpiece.

• Do not put unnecessary pressure on the blade and avoid applying

lateral pressure.

• Take extra care when cutting curves - move the blade slowly to

avoid stress on the blade.

WOOD

• Check that any previously used timber being sawn does not contain

any nails or other metal objects which would damage the blade.

METAL

• Choose a suitable blade for cutting metal

• Lubricate the material and blade with cutting oil to prevent

overheating.

HOLE CUTTING

• When starting a cut from the center of a work piece, drill a 12mm

diameter hole to ensure that there is clearance for the blade

• Remember that the blade should emerge from the workpiece at

every point of the cut.

• When cutting tight curves, reduce the forward speed of the saw.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]