3D Creations North American P 51 D Mustang Manuel d'instructions de montage - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} 3D Creations North American P 51 D Mustang. 3D Creations North American P 51 D Mustang 15 pages. Paper scale model kit
Imprimer la page
Parts #9 are to be glued down flat to cardboard and then cut to shape.
Part #9 is not
necessary if you are not going to build the kit with landing gear.
Sandwich the landing
gear strut between two of the wing spars (part #9) as shown in figure 17. Make sure that
the two spar edges are matched up evenly and the struts hang at a 90-degree angle from
them. Bad alignment of these parts will cause the landing gear to hang crookedly beneath
the wings.
5