3D Hobby Shop 59" AJ Slick Manuel d'installation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20 pages.
Imprimer la page14
Install elevator pushrod onto horn as shown. Tighten the ball-link to the elevator horn using a 2mm
screw, washer, and nut. Once the 2mm screw and nut are tight, use medium or thick CA glue to lock the
nut in place so it cannot rotate. Make sure the 2mm screw and nut cannot come loose in flight.
The rudder pull-pull cables are assembled as shown in the above diagram.