3D Hobby Shop 59" AJ Slick Kurulum Kılavuzu - Sayfa 14

Hava Araçları 3D Hobby Shop 59" AJ Slick için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3D Hobby Shop 59" AJ Slick 20 sayfaları.

Install elevator pushrod onto horn as shown. Tighten the ball-link to the elevator horn using a 2mm

screw, washer, and nut. Once the 2mm screw and nut are tight, use medium or thick CA glue to lock the

nut in place so it cannot rotate. Make sure the 2mm screw and nut cannot come loose in flight.

The rudder pull-pull cables are assembled as shown in the above diagram.