Artistic studio Artristic Studio Easel Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artistic studio Artristic Studio Easel. Artistic studio Artristic Studio Easel 15 pages.

Imprimer la page

How To Make The Tripod Legs Spread

Wider Than Their Pre-set Distance

The three tripod legs are pre-set in their first position to allow the bottom of them to be spread apart

from each other to a distance of 40cm (18 inches). But they can also be adjusted to give you two more

width options. The following describes how you can do that

� To increase the Tripod leg

spread to 90cm (35 inches), first

remove the top Hub section

from the tripod and push all

three legs close together

� Pull this brack-

et out as far as it

will go (it won't

fall off)

� Push or tap

sharply on the

bracket and

push it back

down onto the

first ledge

� In its first posi-

tion, you will see

at the top of each

leg there is a Leg

Adjuster Bracket

to the left of the

large bolt head

and two ledges

just above that

The Leg Adjuster Bracket

� Now pull the

leg out and up-

wards until you

can see that if you

pushed or tapped

the bracket down-

wards suddenly, it

would drop onto

the top of the first

lower ledge.

� Fold the leg back down until it is again

flush up against the centre tube, then re-

peat the process with each of the other

two legs, using images 1 through 5 as a

guide

The next time you pull the legs apart they

will lock in the wider position and keep

doing so until you re-set the bracket.

*See next page for instructions on re-setting

bracket.

How To Make The Tripod Legs Spread

� To return the legs to their

pre-set 18 inches (40cm)

spread, just fold all three legs

together again

� To adjust the

legs to open to

PULL

the 3rd and wid-

est distance apart,

ensure again that

all legs are folded

down as in im-

age 7 and pull the

bracket out again

� Push the brack-

et down onto this

ledge.

Fold the three legs

flat together as in

image 7, then pull

them open again to

achieve the widest

spread of the legs

Wider Than Their Pre-set Distance

� Now this time

push or tap the

PUSH

bracket back IN

on all three legs.

Next time you

spread the legs

outward they will

revert to their 1st

position

� This time keep

raising the leg

out and upwards

until you see the

bracket over the

top of the third

ledge

� Depending on the sizes of canvas you at-

tach to the easel, this leg widening feature

allows you to experiment with a variety of

heights and positions, and to paint while

sitting with many different types of chairs

and stools