DOD VoTec Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DOD VoTec. DOD VoTec 6 pages. Multi effects processing

OPERATING THE VoTEC

PLUG IN

TURN ON

ROCK OUT

Selecting programs

To select programs use either the footswitches (1), or the Up/down buttons (9). The first three

footswitches select programs, the last footswitch selects banks. To select a specific bank, continue

stepping on bank footswitch until the desired bank number appears in display (5). Then step on

footswitch 1-3 to activate program. Only user programs can be selected with the bank footswitch. To

select the Factory Presets you must use the Up/Down buttons. To make life easy, factory presets are

duplicated in all the user locations.

30 user slots have been provided for you to fill with programs of your own. Editing programs on the

VoTEC has been designed to be efficient and simple. In order to change, add, or delete an effect

simply push the Effect Selector button (4), this selects the effect to edit, the currently selected effect

number will appear in the LED Display (5). Then use the Up/down buttons (9) to increment up or

down through the effects and effect values. When the desired effect has been found, press the Store

Button (6). When the Store Button (6) has been pressed, the store light will blink, this is the VoTEC

asking where you would like the program saved. Use the Up/down buttons (9) to select desired pro-

gram number, press the Store Button (6) one more time to save. To remove a currently active effect,

press the Effect Selector button (4) twice and -- will appear, then press the Store Button (6). This

removes the effect from the chain. If the effect is currently bypassed press the selector button to acti-

vate.

To bypass, simply press the Footswitch (1) of the program you are currently using . bp will appear in

the LED Display (5), this will bypass the VoTEC completely. To re-engage the VoTEC, press any

footswitch.

Caution

this function will revert VoTEC to factory default. All user programs will be

erased.

Hold down both the Compressor and Reverb buttons while powering up the VoTEC. The display will

read rS.

The VoTEC has now reverted to factory default.