DOD VoTec Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DOD VoTec. DOD VoTec 6 pages. Multi effects processing

INPUT

OUTPUT

AND ALL

THOSE

FUNKY

BUTTONS

1. Program and bank selector footswitches These

footswitches provide access to the User banks/programs.

2. Power adaptor input This is where the DOD PS200R

power supply is connected. Use only the DOD PS200R, other

adaptors may damage the VoTEC, and void the warranty.

3. Controller Connect optional DOD VCC1 to have real time

control over mix levels. Also controls wah ranges, and auto-

wah/envelope sensitivity.

4. Effect selector buttons These buttons allow you to select the

effects you wish to use or bypass.

5. Display The LED display in program mode shows which bank

and program is currently selected. In Edit mode it shows the

number and/or status of the selected effect.

6. Store Button Use this button to store your custom programs in

the user memory location of choice.

7. XLR Output Connect VoTEC to mixer here.

8. XLR input Connect your microphone here.

9. Up/Down buttons These buttons scroll up/down selected

effects (edit mode), or up/down through banks/presets

(performance mode).

10. Input Knob Controls the overall input level from your mic.

11. Clip LED The clip LED lights when clipping occurs at the input

of the VoTEC, To eliminate clipping, reduce the setting of

your input level by adjusting the Input knob. Allow the LED to

light occasionally with peak signals.

12. 1/4" HiZ Output jack Connect cable from this jack to your

mixers input, also doubles as headphone output.

13. 1/4" HiZ Input jack Plug in your microphone here.

MULTI EFFECTS PROCESSING