Ambir ImageScan Pro 800ix series Manuel d'installation et de configuration - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} Ambir ImageScan Pro 800ix series. Ambir ImageScan Pro 800ix series 14 pages. High-speed adf scanner installation and setup guide for mac
Également pour Ambir ImageScan Pro 800ix series : Manuel d'installation et de configuration (15 pages)
Imprimer la page
Replace the Pad Module
The approximate use of the pad module is 20,000 scans. A replacement pad module is provided and should
be saved.
Replace Roller
The approximate use of the roller is 100,000 scans. To replace the roller, do the following:
Note: Additional pads and rollers are available for purchase at:
1. Open the ADF cover by pulling the cover open lever.
2. Remove the pad module by pinching both sides of the
pad module and pull it out.
3. Install the new pad module by inserting the tabs on
the module onto their slots on the scanner.
4. Close the ADF cover by pushing it back down until
it snaps back into place.
1. Open the ADF cover by pulling the cover open lever.
2. Remove the pad module by pinching both sides of the
pad module and pull it out.
3. Install the new pad module by inserting the tabs on the
module onto their slots on the scanner.
4. Close the ADF cover by pushing it back down until it
snaps back into place.
www.ambir.com/support/imagescan-pro-800-setup
9