Ambir ImageScan Pro 800ix series Руководство по установке и настройке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке и настройке для Сканер Ambir ImageScan Pro 800ix series. Ambir ImageScan Pro 800ix series 14 страниц. High-speed adf scanner installation and setup guide for mac
Также для Ambir ImageScan Pro 800ix series: Руководство по установке и настройке (15 страниц)

Печатать страницу

Ambir ImageScan Pro 800ix series Руководство по установке и настройке

Replace the Pad Module

The approximate use of the pad module is 20,000 scans. A replacement pad module is provided and should

be saved.

Replace Roller

The approximate use of the roller is 100,000 scans. To replace the roller, do the following:

Note: Additional pads and rollers are available for purchase at:

1. Open the ADF cover by pulling the cover open lever.

2. Remove the pad module by pinching both sides of the

pad module and pull it out.

3. Install the new pad module by inserting the tabs on

the module onto their slots on the scanner.

4. Close the ADF cover by pushing it back down until

it snaps back into place.

1. Open the ADF cover by pulling the cover open lever.

2. Remove the pad module by pinching both sides of the

pad module and pull it out.

3. Install the new pad module by inserting the tabs on the

module onto their slots on the scanner.

4. Close the ADF cover by pushing it back down until it

snaps back into place.