5 times
ASF (cam) sensor error
6 times
Internal temperature
error
7 times
Ink absorber full
8 times
Print head temperature
rise error
9 times
EEPROM error
10 times
VH monitor error
12 times
APP position error
14 times
APP sensor error
15 times
USB Host VBUS
overcurrent
19 times
Ink tank position sensor
error
22 times
Scanner home position
error
Power and
ROM / RAM error
Alarm LEDs lit
Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or
EEPROM information print). If the counter value is 7% or more, also replace the ink absorber kit (QY5-0192)
when replacing the logic board ass'y. If the counter value is less than 7%, register the current ink absorber
counter value to the replaced new logic board instead.
[See 3-3. Adjustment / Settings, (10) Service mode, for details.]
[5700] An error occurred in the ASF cam
sensor.
[5400] The internal temperature is not normal.
[5B00,
The ink absorber is supposed to be full.
5B10,
Message on the LCD:
5B01,
Ink absorber full. Service required.
5B11]
Error codes:
Overseas:
5B00: Main ink absorber
5B10: Borderless-print ink absorber
Japan:
5B01: Main ink absorber
5B11: Borderless-print ink absorber
[5200] The print head temperature exceeded the
specified value.
[6800] A problem occurred in writing to the
EEPROM.
[B200] The internal temperature exceeded the
specified value.
[6A80] An error occurred in the APP motor
during purging operation.
[6A90] An error occurred in the APP cam
sensor.
[9000] The USB Host VBUS is overloaded.
[6502] None of the ink tank position is detected. - Spur base unit (QM3-2664)
[5010] The scanner unit cannot detect the home
position, or the scanner unit warming-up
is not performed properly at power-on.
On the LCD, "Scanner is not operating
correctly." is displayed.
---
The check sum value is incorrect in the
ROM check or RAM check at hard-
power-on.
6 / 41
- Logic board (QM3-2834)
- Sheet feed unit (QM3-2677)
- PE sensor board (QM3-2571)
- Logic board (QM3-2834)
- Logic board (QM3-2834)
- Carriage unit (QM3-2650)
- Ink absorber kit (QY5-0192)
- Print head (QY6-0070)
- Logic board (QM3-2834)
- Logic board (QM3-2834)
- Print head (QY6-0070)
- Carriage unit (QM3-2650)
- Logic board (QM3-2834)
- Sheet feed unit (QM3-2677)
- Purge unit (QM3-2651)
- Logic board (QM3-2834)
- Sheet feed unit (QM3-2677)
- Logic board (QM3-2834)
- Logic board (QM3-2834)
- Logic board (QM3-2834)
- Scanner unit (QM3-2672)
- Logic board (QM3-2834)
Halaman Cetak