ATI Technologies 39-0050 Panduan Pemasangan & Pengoperasian - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Alat Ukur ATI Technologies 39-0050. ATI Technologies 39-0050 19 halaman. Digital control installation & operation
Halaman Cetak
24volt Feeder Connections using Existing 24volt Power Supply and ATL Control Power Supply. WestFalia 'M' type feeder
WITH
integral ballast resistor.
Figures in square brackets refer to minimum cable csa (mm2 ).
Existing 24v Power Supply
Output: 24volts AC or DC
Relay and Connector fitted
to the base of the Digital Control
Fuse: In-line 2A
Feeder Connector Block Assembly
Double Digital Controls are fitted with 2 Trigger Relays and a 3 way connector
in the base of the enclosure. One connector is a common Negative 24volts DC
and the other two are the trigger outputs to the feeder connector blocks.
Power Supply
24volts AC or DC to ATL Control Power Supply [2.5]
5
88
Digital Feeder Control
8
2 x 1N4002 Diodes
Note White (+) Band
!
DATA SHEET: 23A
DIGITAL CONTROL
WS RESISTOR FITTED
ATL Control
1
7
6
Check that the motor
Integral Ballast Resistor
Green (+)
Brown (+)
M
Grey (Trig)
White (-)
Yellow (-)
is fitted
with an