ATI Technologies 39-0050 설치 및 운영 매뉴얼 - 페이지 18
{카테고리_이름} ATI Technologies 39-0050에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies 39-0050 19 페이지. Digital control installation & operation
페이지 인쇄
24volt Feeder Connections using Existing 24volt Power Supply and ATL Control Power Supply. WestFalia 'M' type feeder
WITH
integral ballast resistor.
Figures in square brackets refer to minimum cable csa (mm2 ).
Existing 24v Power Supply
Output: 24volts AC or DC
Relay and Connector fitted
to the base of the Digital Control
Fuse: In-line 2A
Feeder Connector Block Assembly
Double Digital Controls are fitted with 2 Trigger Relays and a 3 way connector
in the base of the enclosure. One connector is a common Negative 24volts DC
and the other two are the trigger outputs to the feeder connector blocks.
Power Supply
24volts AC or DC to ATL Control Power Supply [2.5]
5
88
Digital Feeder Control
8
2 x 1N4002 Diodes
Note White (+) Band
!
DATA SHEET: 23A
DIGITAL CONTROL
WS RESISTOR FITTED
ATL Control
1
7
6
Check that the motor
Integral Ballast Resistor
Green (+)
Brown (+)
M
Grey (Trig)
White (-)
Yellow (-)
is fitted
with an