ATI Technologies 39-0050 Manuel d'installation et d'utilisation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} ATI Technologies 39-0050. ATI Technologies 39-0050 19 pages. Digital control installation & operation
Imprimer la page
24volt Feeder Connections using Existing 24volt Power Supply and ATL Control Power Supply. WestFalia 'M' type feeder
WITH
integral ballast resistor.
Figures in square brackets refer to minimum cable csa (mm2 ).
Existing 24v Power Supply
Output: 24volts AC or DC
Relay and Connector fitted
to the base of the Digital Control
Fuse: In-line 2A
Feeder Connector Block Assembly
Double Digital Controls are fitted with 2 Trigger Relays and a 3 way connector
in the base of the enclosure. One connector is a common Negative 24volts DC
and the other two are the trigger outputs to the feeder connector blocks.
Power Supply
24volts AC or DC to ATL Control Power Supply [2.5]
5
88
Digital Feeder Control
8
2 x 1N4002 Diodes
Note White (+) Band
!
DATA SHEET: 23A
DIGITAL CONTROL
WS RESISTOR FITTED
ATL Control
1
7
6
Check that the motor
Integral Ballast Resistor
Green (+)
Brown (+)
M
Grey (Trig)
White (-)
Yellow (-)
is fitted
with an