AudioCodes Mediant 800C Panduan Pengaturan Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pengontrol AudioCodes Mediant 800C. AudioCodes Mediant 800C 10 halaman. Session border controller
Halaman Cetak
Changing VMware Host's Network Settings
The default IP address of the VMware ESXi host on whose virtual machine the ZPLS module is running is
192.168.0.10/24. Instead of using this default address, you can change it (and other network settings) to suit
your IP addressing scheme.
To change VMware host's networking address:
1.
Connect the RJ-45 connector on one end of a straight-through Ethernet cable (not supplied) to the
device's Gigabit Ethernet port #1 (located on the rear panel), and then connect the other end of the
cable to your computer (or laptop).
2.
Change your computer's IP address (e.g., 192.168.0.100/24) so that it's in the same subnet as the
default address of the VMware host.
5 |
P a g e