AudioCodes Mediant 800C Посібник з швидкого налаштування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Контролер AudioCodes Mediant 800C. AudioCodes Mediant 800C 10 сторінок. Session border controller
Друкувати сторінку
Changing VMware Host's Network Settings
The default IP address of the VMware ESXi host on whose virtual machine the ZPLS module is running is
192.168.0.10/24. Instead of using this default address, you can change it (and other network settings) to suit
your IP addressing scheme.
To change VMware host's networking address:
1.
Connect the RJ-45 connector on one end of a straight-through Ethernet cable (not supplied) to the
device's Gigabit Ethernet port #1 (located on the rear panel), and then connect the other end of the
cable to your computer (or laptop).
2.
Change your computer's IP address (e.g., 192.168.0.100/24) so that it's in the same subnet as the
default address of the VMware host.
5 |
P a g e