Datapath Fx4-SDI Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengontrol Datapath Fx4-SDI. Datapath Fx4-SDI 13 halaman. Multi display controller
Juga untuk Datapath Fx4-SDI: Panduan Memulai Cepat (17 halaman)

Halaman Cetak
Datapath Fx4-SDI Panduan Memulai Cepat
STEP 4 CONNECT MAINS CABLE
When the power is switched on the Hx4 will boot and the LEDs on the front panel
will flash for up to 15 seconds. Should the LED's continue to flash see the trouble-
shooting section.

STEP 5 CONNECTING TO A PC

To successfully configure the Fx4, first install the Wall Designer application on your
PC by downloading the latest version from the Datapath website:
www.datapath.co.uk.
When the Hx4 has booted, connect it to your PC using the USB cable provided. The
Hx4 unit is a plug and play device, Wall Designer will detect it when the layouts are
configured.
The Hx4 can also be configured via a Network, see Step 6.
Page 4
Switch On
USB Port
Connect Mains cable