Datapath Fx4-SDI 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Datapath Fx4-SDI에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath Fx4-SDI 13 페이지. Multi display controller
Datapath Fx4-SDI에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄
Datapath Fx4-SDI 빠른 시작 매뉴얼
STEP 4 CONNECT MAINS CABLE
When the power is switched on the Hx4 will boot and the LEDs on the front panel
will flash for up to 15 seconds. Should the LED's continue to flash see the trouble-
shooting section.

STEP 5 CONNECTING TO A PC

To successfully configure the Fx4, first install the Wall Designer application on your
PC by downloading the latest version from the Datapath website:
www.datapath.co.uk.
When the Hx4 has booted, connect it to your PC using the USB cable provided. The
Hx4 unit is a plug and play device, Wall Designer will detect it when the layouts are
configured.
The Hx4 can also be configured via a Network, see Step 6.
Page 4
Switch On
USB Port
Connect Mains cable