- ページ 4

コントローラー Datapath Fx4-SDIのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Datapath Fx4-SDI 13 ページ。 Multi display controller
Datapath Fx4-SDI にも：クイック・スタート・マニュアル (17 ページ)

ページを印刷する

STEP 4 CONNECT MAINS CABLE

When the power is switched on the Hx4 will boot and the LEDs on the front panel

will flash for up to 15 seconds. Should the LED's continue to flash see the trouble-

shooting section.

STEP 5 CONNECTING TO A PC

To successfully configure the Fx4, first install the Wall Designer application on your

PC by downloading the latest version from the Datapath website:

www.datapath.co.uk.

When the Hx4 has booted, connect it to your PC using the USB cable provided. The

Hx4 unit is a plug and play device, Wall Designer will detect it when the layouts are

configured.

The Hx4 can also be configured via a Network, see Step 6.

Page 4

Switch On

USB Port

Connect Mains cable