Datavideo DAC-10 Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Beralih Datavideo DAC-10. Datavideo DAC-10 4 halaman. Datavideo dac-10: quick setup
Juga untuk Datavideo DAC-10: Pengaturan Cepat (2 halaman), Buku Petunjuk (10 halaman)

Datavideo DAC-10 Pengaturan Cepat
C. Cable connections
Make sure your VCR or Analog source is connected to the inputs of the DAC-10.
A 6-pin FireWire cable can be connected to the rear of the DAC-10. The opposite end should
be connected to your 1394/connector on your computer.
If you would like to monitor your video, a composite BNC video cable can be used to connect
a video monitor. Connect a composite BNC cable from the rear of the DAC-10 and connect
the opposite end to the input of your monitor.
Note: S-video cables only carry a video signal, so you will need to connect your RCA audio
cables to the converter to capture sound.
Helpful Hint: The "OUTPUT" from one device, must go to the "INPUT" on another device.