Datavideo DAC-10 Hızlı Kurulum - Sayfa 2

Anahtar Datavideo DAC-10 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Datavideo DAC-10 4 sayfaları. Datavideo dac-10: quick setup
Ayrıca Datavideo DAC-10 için: Hızlı Kurulum (2 sayfalar), Kullanım Kılavuzu (10 sayfalar)

Sayfayı Yazdır
Datavideo DAC-10 Hızlı Kurulum
C. Cable connections
Make sure your VCR or Analog source is connected to the inputs of the DAC-10.
A 6-pin FireWire cable can be connected to the rear of the DAC-10. The opposite end should
be connected to your 1394/connector on your computer.
If you would like to monitor your video, a composite BNC video cable can be used to connect
a video monitor. Connect a composite BNC cable from the rear of the DAC-10 and connect
the opposite end to the input of your monitor.
Note: S-video cables only carry a video signal, so you will need to connect your RCA audio
cables to the converter to capture sound.
Helpful Hint: The "OUTPUT" from one device, must go to the "INPUT" on another device.