Dato CRMPL 201 Panduan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Aksesori Mobil Dato CRMPL 201. Dato CRMPL 201 14 halaman. Auto body collision repair system
Halaman Cetak
1．TRADEMARK
On receiving the frame machine check the parts of the identification nameplate that has to
correspond to that shown below.
Table 1:
LAUNCH
2． GENERAL PRESENTATION OF STANDARD COMPONENTS
The frame machine model CRMPL 201 standard type is composed as follows:
Table 2:
NO
MAIN PART
1
FRAME ASSEMBLY
CLAMPS/SUPPORT ASSEMBLY
2
ACCESSORY ASSEMBLY
3
3. ACCESSORY ASSEMBLY
1) Pulling tools assembly.
It consists in the tools board, dolly for tools board and 17 pieces of pulling tools. The different
pulling tools are used according to the different distortion. The pulling tools may be used
singly; also several tools are used together. The use method is not changeless, but various
according to the model of accident vehicle, the degree of damage, the habit of operators. It
MODEL:
YEAR OF PRODUCTION
FRAME LENGTH
FRAME WIDTH
FRAME HEIGHT
POST MAX. TENSION
POST WORKING RANGE
PNEUMATIC PRESSURE RANGE
MAX. LIFTING WEIGHT
Frame
Pulling tower
3.5M Main chain
Chain with hook
Loading ramp
Main clamps
Wheel bracket
Air hydraulic pump
Air hydraulic cylinder
Hydraulic hose with connector
Pulling tools
Wheel dolly
Tools board
Dolly for tools board
Hand winch
2
20150110
5600mm
2112mm
300-1080mm
95KN
360 Degree
0.8MPa
3500Kg
PART
QUAN.
CRMPL 201
UNIT
1
Set
2
Set
2
Piece
2
Piece
2
Piece
4
Set
2
Set
2
Set
2
Set
2
Piece
19
Piece
2
Piece
1
Set
1
Set
1
set