4tronix Pan Servo Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Robotika 4tronix Pan Servo. 4tronix Pan Servo 7 halaman. Pan & tilt kit for pi2go and pi2go-lite

Step 5: Attach the Pan Servo to the Base Mounting Plate

Push the servo through the hole in the base mounting plate so the servo tabs are on

•

the upper surface

Use 2 of the 6mm M2.5 screws to screw directly into the mounting holes of the servo

•

from underneath

Step 6: Fit the Base Mounting to the Pi2Go

Use the 2 screws you removed in step 4 to screw the base mounting plate

Attach the straight servo arm using the small screw in the servo bag. Fit it so that it runs

front to back as shown, when the servo is in its middle position