- ページ 4
ロボット工学 4tronix Pan ServoのPDF マニュアルをオンラインで閲覧またはダウンロードできます。4tronix Pan Servo 7 ページ。 Pan & tilt kit for pi2go and pi2go-lite
Step 5: Attach the Pan Servo to the Base Mounting Plate
Push the servo through the hole in the base mounting plate so the servo tabs are on
•
the upper surface
Use 2 of the 6mm M2.5 screws to screw directly into the mounting holes of the servo
•
from underneath
Step 6: Fit the Base Mounting to the Pi2Go
Use the 2 screws you removed in step 4 to screw the base mounting plate
Attach the straight servo arm using the small screw in the servo bag. Fit it so that it runs
front to back as shown, when the servo is in its middle position