4tronix Pan Servo 매뉴얼 - 페이지 4
{카테고리_이름} 4tronix Pan Servo에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4tronix Pan Servo 7 페이지. Pan & tilt kit for pi2go and pi2go-lite
페이지 인쇄Step 5: Attach the Pan Servo to the Base Mounting Plate
Push the servo through the hole in the base mounting plate so the servo tabs are on
•
the upper surface
Use 2 of the 6mm M2.5 screws to screw directly into the mounting holes of the servo
•
from underneath
Step 6: Fit the Base Mounting to the Pi2Go
Use the 2 screws you removed in step 4 to screw the base mounting plate
Attach the straight servo arm using the small screw in the servo bag. Fit it so that it runs
front to back as shown, when the servo is in its middle position