Gadget Labs WavePRO SPDIF Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu Suara Gadget Labs WavePRO SPDIF. Gadget Labs WavePRO SPDIF 15 halaman. Option cards

Halaman Cetak
ADAT JUMPER STRAPPING
For the ADAT option card, the Digital I/O bracket is configured as
shown below. Check this strapping before installation.
JP2
JP4
2
1
3
2
1
JP3
JP1
" "
STEP
CONNECT THE GRAY SIGNAL CABLE TO THE
DIGITAL I/O BRACKET
Don't worry -- the connectors are keyed & there's no way
to plug in the signal cable incorrectly.
J1
use a jumper block (included) to
4
connect pins 1 and 2
3
J2
this connector is used to connect the gray
signal cable to the SPDIF option card.
J3
use a jumper block to connect pins 2 and 3
3
2
1
J4
use a jumper block to connect pins 3 and 4
7