Gadget Labs WavePRO SPDIF 사용자 설명서 - 페이지 8

{카테고리_이름} Gadget Labs WavePRO SPDIF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gadget Labs WavePRO SPDIF 15 페이지. Option cards

ADAT JUMPER STRAPPING
For the ADAT option card, the Digital I/O bracket is configured as
shown below. Check this strapping before installation.
JP2
JP4
2
1
3
2
1
JP3
JP1
" "
STEP
CONNECT THE GRAY SIGNAL CABLE TO THE
DIGITAL I/O BRACKET
Don't worry -- the connectors are keyed & there's no way
to plug in the signal cable incorrectly.
J1
use a jumper block (included) to
4
connect pins 1 and 2
3
J2
this connector is used to connect the gray
signal cable to the SPDIF option card.
J3
use a jumper block to connect pins 2 and 3
3
2
1
J4
use a jumper block to connect pins 3 and 4
7