Gadget Labs WavePRO SPDIF Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gadget Labs WavePRO SPDIF. Gadget Labs WavePRO SPDIF 15 pagina's. Option cards

ADAT JUMPER STRAPPING
For the ADAT option card, the Digital I/O bracket is configured as
shown below. Check this strapping before installation.
JP2
JP4
2
1
3
2
1
JP3
JP1
" "
STEP
CONNECT THE GRAY SIGNAL CABLE TO THE
DIGITAL I/O BRACKET
Don't worry -- the connectors are keyed & there's no way
to plug in the signal cable incorrectly.
J1
use a jumper block (included) to
4
connect pins 1 and 2
3
J2
this connector is used to connect the gray
signal cable to the SPDIF option card.
J3
use a jumper block to connect pins 2 and 3
3
2
1
J4
use a jumper block to connect pins 3 and 4
7