GREAT PLANES Gee Bee Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mainan GREAT PLANES Gee Bee. GREAT PLANES Gee Bee 16 halaman. Model aircraft great planes gee bee

GREAT PLANES Gee Bee Buku Petunjuk
❏ ❏
6. Pull the elastic thread through the fuselage. Pass the
thread through the fl ying wire retainer as shown.
❏ ❏
7. Follow the same procedure to install the aft fl ying wire.
❏ ❏
8. Adjust the tension on the fl ying wires so that there
is no slack in the elastic thread. But, they need to be able to
stretch if hit.
❏ ❏
9. Position the spreader bars so that the fl ying wires are
straight. Apply a drop of CA on the joint between the spreader
bars and the fl ying wires to hold the spreader bars in place.
10. Return to step 1 and install the fl ying wires through
the left wing.
11. Pass the elastic thread through the two holes in the
belly pan and through the hole in one of the inside wheel pants.
12. Glue the elastic thread to the wheel pant as before.
13. Cut the elastic thread a little long at the other wheel
pant. Pass the thread through the wheel pant so that a slight
amount of tension is on the thread. Apply a drop of CA to the
thread. After the CA has hardened, trim the thread fl ush with
the inside of the wheel pant.

BALANCE THE MODEL (C.G.)

CAUTION: Disconnect the motor battery and switch the
transmitter off.
1. Slide the aluminum collet type prop adapter on the
motor shaft.
10