Gree 13-04661 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pendingin Udara Gree 13-04661. Gree 13-04661 20 halaman. Mobile air conditioner

Halaman Cetak

Operation of wireless remote control

Notice: This is a general use remote controller, it could be used for the air conditioners with

multifunction; For some function, which the model dosen't have, if press the corresponding

button on the remote controller that the unit will keep the original running status.

Remote control

+ button

For presetting temperature increasing. Press

this button,can set up the temperature,

when unit is on . Continuously press and

hold this button for more than 2 seconds,

the corresponding contents will be changed

rapidly, until unpress the button then send

the information,°C(°F)is disp- laying all

along. In Auto mode, the temp- erature can

not be set up, but operate this button can

send the signal. Centigrade setting range

:16°C-30°C; Fahrenheit scale setting range

61°F-86°F.

- button

Presetting temperature can be decreased.

Press this button, the temperature can be

set up, continuously press this button and

hold for two seconds, the relative contents

can quickly change, until unhold this but-

ton and send the order that the °C (°F)

signal will be displayed all the time. The

temperature adjustment is unavailable

under the Auto mode, but the order can be

sent by if pressing this button.

TIMER

TIMER button

By pressing this key under switch-off

state, you may set the time for auto swit-

ch-on. The range of setting is 0.5 ~ 24

hours. The characters "T-ON" and "H" will

flash for 5 seconds. Within 5 seconds,you

may make one press of this key to com-

plete the setting and send the message.If

the setting is valid, the set time will be

displayed for 2 seconds before display of

the temperature message. During flash,

you may press "+" key to increase the

value and press "-" key to decrease the

value. The time will increase or decrease

by 0.5 hours with each press of this key.

If pressing "+" or "-" key continuously, the

time value will change rapidly. The remo-

te controller can increase the set time by

0.5 hours every 0.25 seconds. After being

energized, the fault is no timer setting,

and there is no display of "T-ON" or "H".

Press ON/OFF key to switch on the unit

and cancel the auto switch-on.When the

temperature display becomes constant,

you may press this key again to display

the remaining set time. The time value,

"T-On" and "H" will display constantly for

2 seconds. After 2 seconds,the preset

temperature will be displayed. Within

these 2 seconds, you may press this key

again to cancel the auto switch-on and

send the message.

By pressing this key under switch-on

state, you may set the time for auto

switch-off. The method of setting as the

same as for auto switch-on.