DynaQuip WaterCop LEAK STOP+ Panduan Pemilik dan Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik dan Panduan Instalasi untuk Unit Kontrol DynaQuip WaterCop LEAK STOP+. DynaQuip WaterCop LEAK STOP+ 13 halaman.
Halaman Cetak
Installation Location
+
The WaterCop® Leak Stop
must be
installed indoors and directly into the
plumbing supply line, just upstream
of the appliance or area you wish
+
to monitor and protect. Leak Stop
requires 120 VAC power to operate.
Verify location of an outlet within
+
easy reach of the Leak Stop
unit.
The attached moisture sensor will
be secured to the fl oor or catch pan
where water would fi rst accumulate
if a leak occurs. The most common
area of installation would be a water
heater as illustrated here:
7' Max
One Out
One In
5