DynaQuip WaterCop LEAK STOP+ 사용 설명서 및 설치 설명서 - 페이지 5

{카테고리_이름} DynaQuip WaterCop LEAK STOP+에 대한 사용 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaQuip WaterCop LEAK STOP+ 13 페이지.

페이지 인쇄
DynaQuip WaterCop LEAK STOP+ 사용 설명서 및 설치 설명서

Installation Location

+
The WaterCop® Leak Stop
must be
installed indoors and directly into the
plumbing supply line, just upstream
of the appliance or area you wish
+
to monitor and protect. Leak Stop
requires 120 VAC power to operate.
Verify location of an outlet within
+
easy reach of the Leak Stop
unit.
The attached moisture sensor will
be secured to the fl oor or catch pan
where water would fi rst accumulate
if a leak occurs. The most common
area of installation would be a water
heater as illustrated here:
7' Max
One Out
One In
5