Autool BT160 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Autool BT160. Autool BT160 10 halaman. Automotive electric system tester

◆Operation Instruction

1.Quick Self-Test

Please complete self-test to determine tool's functional

availability prior to using it.

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.

★ Press button to "-" side , the LED should light RED.

★ Press button to "=" side , the LED should light GREEN.

★ Loose the button and contact the probe tip to positive

terminal of battery , the LED should light RED.

★ Loose the button and contact the probe tip to negative

terminal of battery , the LED should light GREEN.

★ Press button to "-" side , the LED should light RED. Then

have the probe tip quickly contact negative terminal of battery

(there will be a little sparks), LED indicator turns to GREEN

with buzzer sounding.

NOTE: DO NOT operate it in area with combustible gas,

dust and explosive conditions. NOT allowed to use it with AC

and over 24V DC circuit.

2.Polarity Testing

This tool can test uncertain polarity of contact in the circuit

of vehicle.

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.