Autool BT160 사용자 설명서 - 페이지 4

{카테고리_이름} Autool BT160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool BT160 10 페이지. Automotive electric system tester

◆Operation Instruction

1.Quick Self-Test

Please complete self-test to determine tool's functional

availability prior to using it.

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.

★ Press button to "-" side , the LED should light RED.

★ Press button to "=" side , the LED should light GREEN.

★ Loose the button and contact the probe tip to positive

terminal of battery , the LED should light RED.

★ Loose the button and contact the probe tip to negative

terminal of battery , the LED should light GREEN.

★ Press button to "-" side , the LED should light RED. Then

have the probe tip quickly contact negative terminal of battery

(there will be a little sparks), LED indicator turns to GREEN

with buzzer sounding.

NOTE: DO NOT operate it in area with combustible gas,

dust and explosive conditions. NOT allowed to use it with AC

and over 24V DC circuit.

2.Polarity Testing

This tool can test uncertain polarity of contact in the circuit

of vehicle.

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.