Autool BT160 사용자 설명서 - 페이지 5

{카테고리_이름} Autool BT160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool BT160 10 페이지. Automotive electric system tester

★ Contact the probe tip to a positive (+), the LED should

light RED.

★ Contact the probe tip to a negative (-), the LED should

light GREEN.

NOTE: DO NOT operate it in area with combustible gas,

dust and explosive conditions. NOT allowed to use it with AC

and over 24V DC circuit.

3.Continuity Testing

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.

★ Connect auxiliary ground lead to one side of tested wire

along with probe tip connecting to the other side. When

continuity is present, the LED will light GREEN. If LED does

NOT light up, NO continuity present.

+ -